By continuing to this site, you agree to the storing of Cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
WELCOME!
sign* up to our newsletter
to get 10% Off on your next purchase
You have no items in your shopping cart.
Medieval Swords and Daggers
Bastard Sword by Paul Chen / Hanwei
#501732
Hand and a half sword based on the Oakeshott Type XVIIIA. The blade is 5160 high carbon steel.
$269.95
Mercenary Holbein Dagger
#404483
This double-edged dagger is lively in the hand and wickedly fast. The contoured grip is stained hardwood. Includes a leather sheath with hand-applied, antiqued steel reinforcing accents. Comes factory sharp.
$119.95
De Joinville Sword
#501694
This beautiful sword was a very popular design during the 1400s due to its ease of punching through the armor of the day. Made from 1065 high carbon steel by the smiths at Windlass and comes factory sharp.
$269.95
Damascus Short Sword
#404451
This medieval style short sword has a double edged Damascus steel blade which slashes and penetrates your target with ease. Features a blonde wood and bone handle with black and brass spacers and a steel pommel.
$114.95
Stag Horn & Damascus Hunting Dagger
#404446
This Damascus steel, double-edged dagger has a stunning stag horn handle. The crossguard and pommel are solid brass. Includes leather scabbard.
$49.95
Faithkeeper - Sword of the Knights Templar
#501691
This medieval Crusader sword has a deep fuller on both sides of the high carbon steel blade, which has been pierced with a cross at the ricasso. Also features an engraved guard and inset coin in the pommel. It comes with a matching leather scabbard and belt. Comes factory sharp.
$394.95
The Accolade Dagger of the Knights Templar
#404335
This medieval dagger has a high carbon steel blade with the seal of the Knights Templar on the ricasso. The pommel has an inlaid cross and all hardware on the cross-guard and pommel have been plated in sterling silver. Comes factory sharp.
$179.95
Battlecry Crecy War Dagger
#404231
The double-edged War Dagger has a 1065 high carbon steel blade tempered to a low 50s RC. Battle-hardened finish with a darkened patina and peened full tang. Matching scabbard, and certificate of authenticity included. Overall length 15 inches.
$149.95
Knights of the Middle Ages carried a wide range of swords and weapons. MuseumReplicas.com prides itself on being the world’s leading manufacturer of medieval swords and weapons.
Top Customer Reviews
Review of: 14th Century Longsword
Matt Easton’s YouTube review goes over most on the details of the sword so I will not reiterate what he discusses. Instead, will give my personal experience with it and some of the pros and cons.
Firstly, the presentation is phenomenal. The inner box is very thick, well padded, and it makes you feel as though the sword is a collector’s item not just a hunk of steel. The included wax and cleaning cloth is a nice touch as well.
The sword itself looks and feels very nice overall. The hilt is very impressively constructed. The grip wrap is EXTREMELY tight with no gaps or overhang to be seen. The cross guard conforms to the blade
nicely with slightly less than a 1/16in gap. The pommel is beautiful, surprisingly large, and is likely largely responsible for this swords Balance point. While it is a rather heavy sword, the balance is close to the hand which combined with the pommel and the distal taper makes it very easy to
handle. The scabbard also surprised me. While it is simple, it fits the sword well and seems well constructed.
Now for the cons. From a distance the blade looks flawless, but if you get it in the right light there is a slight but noticeable waviness to finish, likely from forging. On my example, the waves left one of the edges with a very slight warp in a section on the edge. The central ridge also does not perfectly line up with the tip but it is so minor that you could likely fix that just by sharpening it. The edge is also fairly close
to being sharp should you want to do so. I personally do not mind these finish flaws as I doubt historical examples would have been perfect in this regard either.
Overall the sword is very sold for the money with the caveat that if you are expecting a perfect blade grind you may want to look elsewhere. Personally, I will be purchasing more swords from this series and look forward to more historically accurate replicas in the future.
Firstly, the presentation is phenomenal. The inner box is very thick, well padded, and it makes you feel as though the sword is a collector’s item not just a hunk of steel. The included wax and cleaning cloth is a nice touch as well.
The sword itself looks and feels very nice overall. The hilt is very impressively constructed. The grip wrap is EXTREMELY tight with no gaps or overhang to be seen. The cross guard conforms to the blade
nicely with slightly less than a 1/16in gap. The pommel is beautiful, surprisingly large, and is likely largely responsible for this swords Balance point. While it is a rather heavy sword, the balance is close to the hand which combined with the pommel and the distal taper makes it very easy to
handle. The scabbard also surprised me. While it is simple, it fits the sword well and seems well constructed.
Now for the cons. From a distance the blade looks flawless, but if you get it in the right light there is a slight but noticeable waviness to finish, likely from forging. On my example, the waves left one of the edges with a very slight warp in a section on the edge. The central ridge also does not perfectly line up with the tip but it is so minor that you could likely fix that just by sharpening it. The edge is also fairly close
to being sharp should you want to do so. I personally do not mind these finish flaws as I doubt historical examples would have been perfect in this regard either.
Overall the sword is very sold for the money with the caveat that if you are expecting a perfect blade grind you may want to look elsewhere. Personally, I will be purchasing more swords from this series and look forward to more historically accurate replicas in the future.
Reviewed by: Cody, February 14, 2023
Review of: 14th Century Longsword
Looking at the history of swords and how they represent the technology and tactics of their time era is one of the major factors that led us at Unsheathed Sword Reviews into the collecting addiction. Given that, it is no surprise to anyone that we picked this sword to review.
The question this sword poses is this: is it possible to produce a sword that is an accurate representation of a historical piece, has good fit and finish, and performs well, all at a mid-range price point? Unsheathed Sword Reviews gives our opinion on whether Windlass and the Royal Armouries were able to pull it off in our review below.
https://youtu.be/TcRg93-3Ym4
The question this sword poses is this: is it possible to produce a sword that is an accurate representation of a historical piece, has good fit and finish, and performs well, all at a mid-range price point? Unsheathed Sword Reviews gives our opinion on whether Windlass and the Royal Armouries were able to pull it off in our review below.
https://youtu.be/TcRg93-3Ym4
Reviewed by: Jonathan, February 08, 2023
Review of: 15th Century Longsword
I reviewed the 15th century English Longsword in 4k resolution on YouTube: https://youtu.be/reMAZSkW2jk and the second part with extensive cutting can be seen at https://youtu.be/2jQ3Z6JKMSQ
Oakeshott type XVII longswords are rare to find on the reproduction market. Prior to this attempt by Windlass, the only option you have is the premium makers like Albion and some custom makers, which cost a lot. Under the direction of Matt Easton of scholagladiatoria, and Royal Armouries National Museum of England, Windlass did a highly faithful recreation of an typical example of this rare type of longsword. It features a graceful distal taper and accurate hexagonal cross section, just like a late medieval longsword of type XVII should. It handles well with excellent point precision, yet is still quite rigid for its length and carries authority in cuts. This is the right direction and Windlass should go back to drawing board to revamp practically every older model they have, and feature the correct mass distribution to accurately represent the type of sword they claim to replicate.
Oakeshott type XVII longswords are rare to find on the reproduction market. Prior to this attempt by Windlass, the only option you have is the premium makers like Albion and some custom makers, which cost a lot. Under the direction of Matt Easton of scholagladiatoria, and Royal Armouries National Museum of England, Windlass did a highly faithful recreation of an typical example of this rare type of longsword. It features a graceful distal taper and accurate hexagonal cross section, just like a late medieval longsword of type XVII should. It handles well with excellent point precision, yet is still quite rigid for its length and carries authority in cuts. This is the right direction and Windlass should go back to drawing board to revamp practically every older model they have, and feature the correct mass distribution to accurately represent the type of sword they claim to replicate.
Reviewed by: Kane, February 07, 2023
Review of: European 14th Century Arming Sword
I would agree that this is slightly overpriced at $600, but MRL has coupons floating around everywhere and sales a few times a year.
Addressing the critical review above, yes this sword doesn't fit modern standards of fit and finish, but it greatly exceeds most historical originals. I find the idiosyncrasies charming, but if you're after an art piece, then perhaps look elsewhere. The sword form is correct where it counts.
The handling and performance however is up there with the best. After sharpening it (took about 20 minutes, the sword comes 85 percent done with a superb primary bevel- I was able to cut a bottle with the factory edge), I've run the sword through many different targets and through quite a bit of drilling- it handles and cuts with the best of them. It's a broad, powerful cutter. Point control is excellent. Expect a war sword.
The CoP is very broad and all vibrational nodes are well placed. The blade geometry is top notch. Being based on an original, the proportions are authentic and probably can pass as a decent wallhanger. Though, the markings on the blade leave quite a bit to be desired and do feel souvenir-ish (which technically this is), but if you're after a hard use sword, it probably won't bother you.
The scabbard is budget plus. The outside of the scabbard looks great, but the core of the scabbard is the same old overweight (but also over built) scabbard you'd get at this price point. It works though.
The presentation and box is premium, but I'd personally wish they'd ship it simpler and pass the savings on. If you're after a gift for someone, though, it'll impress. The included wax is a nice touch.
This sword is a solid buy at retail and a bargain with a discount.
Addressing the critical review above, yes this sword doesn't fit modern standards of fit and finish, but it greatly exceeds most historical originals. I find the idiosyncrasies charming, but if you're after an art piece, then perhaps look elsewhere. The sword form is correct where it counts.
The handling and performance however is up there with the best. After sharpening it (took about 20 minutes, the sword comes 85 percent done with a superb primary bevel- I was able to cut a bottle with the factory edge), I've run the sword through many different targets and through quite a bit of drilling- it handles and cuts with the best of them. It's a broad, powerful cutter. Point control is excellent. Expect a war sword.
The CoP is very broad and all vibrational nodes are well placed. The blade geometry is top notch. Being based on an original, the proportions are authentic and probably can pass as a decent wallhanger. Though, the markings on the blade leave quite a bit to be desired and do feel souvenir-ish (which technically this is), but if you're after a hard use sword, it probably won't bother you.
The scabbard is budget plus. The outside of the scabbard looks great, but the core of the scabbard is the same old overweight (but also over built) scabbard you'd get at this price point. It works though.
The presentation and box is premium, but I'd personally wish they'd ship it simpler and pass the savings on. If you're after a gift for someone, though, it'll impress. The included wax is a nice touch.
This sword is a solid buy at retail and a bargain with a discount.
Reviewed by: Leelund, December 28, 2022
Review of: 15th Century Two-Handed Sword
This sword is excellent! The blade is stiff and plays nice in the hands. Unlike many other two-handed swords that I own. Unbeatable value for a sword of this quality! My only complaint I have is it would be hard to make it safe enough to spar with, because it is that good!
Reviewed by: Dirk, December 26, 2022
Review of: European 14th Century Arming Sword
The blade is superb! Well balanced and plays nice in the hand. Edge is blunt but would not take much to put an edge on it. Well worth the price for an excellent sword!
Reviewed by: Dirk, December 26, 2022
Review of: 15th Century Longsword
Great fit and finish. Perfect packaging. And the sword handles great. Over all very please 5/5.
Reviewed by: luis, November 14, 2022
Review of: 15th Century Longsword
The sword is everything Matt’s review of it claims.
The fit and finish and features plus scabbard inclusion by themselves make the price point an unbeatable value, but add to that the fact that it is a 1:1 replica of a famously beautiful historical sword right down to the weapon dynamics, and you have a collectors item.
I am glad I bought it while it’s available. Do it.
The fit and finish and features plus scabbard inclusion by themselves make the price point an unbeatable value, but add to that the fact that it is a 1:1 replica of a famously beautiful historical sword right down to the weapon dynamics, and you have a collectors item.
I am glad I bought it while it’s available. Do it.
Reviewed by: Ian, October 27, 2022
Review of: 15th Century Longsword
The sword is everything Matt’s review of it claims.
The fit and finish and features plus scabbard inclusion by themselves make the price point an unbeatable value, but add to that the fact that it is a 1:1 replica of a famously beautiful historical sword right down to the weapon dynamics, and you have a collectors item.
I am glad I bought it while it’s available. Do it.
The fit and finish and features plus scabbard inclusion by themselves make the price point an unbeatable value, but add to that the fact that it is a 1:1 replica of a famously beautiful historical sword right down to the weapon dynamics, and you have a collectors item.
I am glad I bought it while it’s available. Do it.
Reviewed by: Ian, October 27, 2022
Review of: 15th Century Longsword
When Matt Easton reviewed this sword I was instantly smitten. I was about to buy another sword but put that purchase on hold to get this one. I was nervous, $700 is a lot for a Windlass sword and I like sharp swords, not blunt ones. I took the plunge, ordered it, and hoped for the best. When the package was delivered I was instantly worried, it was heavy as heck. Swords should be light and nimble not bricks. As I unpacked it my concerns were proven to be unfounded, the box the sword is packaged in is the heaviest duty cardboard box I have ever seen, the lid to the box weights more than the sword does!.
Inside was a wonderfully light and nimble sword. Easily handled with one hand and a dream with two. The quality of this sword is amazing, straight lines, minimal waves in the blade finish and while not sharp it is not blunt. More like the final sharpening needs to be done and minimal material would be removed to get it to sharp. To say I am pleased is an understatement. I'll be ordering the 14th Century Arming Sword soon! Kudos to Matt Easton, Windlass and The Royal Armories, they hit this one out of the park.
Inside was a wonderfully light and nimble sword. Easily handled with one hand and a dream with two. The quality of this sword is amazing, straight lines, minimal waves in the blade finish and while not sharp it is not blunt. More like the final sharpening needs to be done and minimal material would be removed to get it to sharp. To say I am pleased is an understatement. I'll be ordering the 14th Century Arming Sword soon! Kudos to Matt Easton, Windlass and The Royal Armories, they hit this one out of the park.
Reviewed by: Tim, October 22, 2022
Award Winner
MRL LOGO
